What to pay attention to when we use oca vacuum lamination machine?
In the repair process of a mobile phone screen broken, laminating the screen is an indispensable process. Although the process of the oca lamination machine may seem simple, it is actually not simple. It needs to be equipped with some supporting equipment and understand the relevant precautions to better complete the laminating work. So what should you pay attention to when you use the oca vacuum laminating machine?
1. Apply OCA glue neatly
During the process of the oca lamination machine, the OCA glue should be applied neatly, the movement should be smooth, and the dust should be cleaned up.
2. Pay attention to vacuum dustproof
When oca laminating machine working, you must pay attention to the dust. Therefore, environmental work must be done well. Otherwise, if you do not pay attention to dust, you may lose all previous efforts and cause bubbles and other undesirable phenomena after lamination.
3. Pay attention to sealing when pressing the screen
After putting on the cover, do not press it with your hands, so as not to get rid of the air in the back. At the same time, put it in place when putting it into the OCA laminating machine, put it inside the sealing ring, and never exceed the sealing ring.
4. Pay attention to symmetrical placement
When using a OCA lamination machine with a relatively large laminating area, if the LCD screen to be laminated is relatively small, try to place the tray in a reasonable position,one you can place it in the middle, and if there are more than one, place it symmetrically. To ensure the lamination effect, but also to ensure that the screen will not be crushed, do not put the screen on side when laminating, otherwise it will easily cause the screen to burst and the effect will be worse.
By Ovena@OCAMaster
