What is an LCD separator machine?
LCD separator machine is meant for removing the damaged glass from the surface of LCD. This is meant for touch screen phones whose LCDs are in working conditions. With the help of the machine the piece glued to the LCD of your phone is removed or repairs, unlike common assumption that LCD is repaired.
Why do you need such a machine?
In most of the cases, the screen of your phone gets damaged. In most of the cases, the LCD is not damaged but the glass over it. By doing this, you are going to save a lot of money.
Generally, you need this machine for removing the glass over the LCD of your phone without harming the LCD and the digitizer. Most of the new phones have all the three components Viz. glass, digitizer, and LCD are glued together. It may pose a little challenge for you, but you will be able to do it with the help of the machine.
How does it work?
This machine has two components which are clamps and hot plate. You just need to heat up the machine to the desired temperature. You can see the temperature on the display panel of the machine. As the display panel shows the desired temperature, you need to put the damaged screen assembly on the hot plate. With the help of the clamps, you can clamp the LCD with the assembly. After removing the broken glass, you can remove the wire between LCD and the glass.
Recent trends of these machines
This section is dedicated to different types of LCD separator machines available in the market today.
LCD separator with vacuum pump
This is a manual type of LCD separator. With the help of the machine, you need to wait for the heating up of the hot plate until it reaches the desired temperature. Then you are going to remove the glass from the LCD.
Automated LCD separator
As the name suggests, the machine determines the desired temperature required to remove the glass from an LCD without your manual intervention. You don’t need to remove the glass from the screen. The machine automatically does the work.
Screen repair machines
Some of the machines available in the market are called repairing machines. These machines also do the same work as the concerned machines do.
Conclusion
Removing the glass from the LCD is a cost effective process. You don’t need to spend a whole lot of money to completely replace your screen. You just need to remove the glass.
